學術榮譽 期刊論文 更多資訊 上課課表 98-2

生活照

姓名: 郭聰源

英文: Tsung-Yuan Kuo

職稱: 教授兼工學院副院長

電話: (06)06-2533131#3554

辦公室: R202

研究室: Q201

E-Mailtykuo@mail.stut.edu.tw

最高學歷: 國立成功大學機械工程博士

研究領域:
銲接技術、顯微分析、材料機械性質分析、破損分析、生醫材料

學術榮譽                                                                                                              TOP

  1. 板金甲級技術士證
  2. 電銲乙級技術士證
  3. 汽車修護乙級技術士證
  4. 台灣區工科學生技藝競賽板金工第三名
  5. 板金與打型板金甲乙丙級技術士技能檢定監評
  6. 汽車車體乙丙級技術士技能檢定監評
  7. 台灣省技能競賽汽車噴漆職類裁判
  8. 指導學生參加第五屆TIC100科技創新競賽,榮獲最佳科技創新事業優質獎(醫療輔具組第一名、最佳技術長獎) (2003國科會、研華科技等)
  9. 指導學生參加九十三年度全國技專院校學生專題製作競賽,榮獲護理與保育類群卓越獎(第一名) (2004,教育部)
  10. 指導學生參加第十二屆全國大專院校超級省油環保車,榮獲超級省油獎第三名車輛製作獎佳作(2004,SAE)
  11. 指導學生參加全國大專院校創意競賽(2003極限創意),榮獲非設計組最佳創意獎 (2003,教育部)
  12. 榮獲中華民國銲接協會九十三年度學術論文獎(2004,銲接協會),題目:以TEM分析鎳基合金高能量束一種銲件微結構之研究,作者:林永定、李驊登、鄭勝隆、郭聰源
  13. 榮獲中華民國銲接協會九十二年度學術論文海報競賽第 一名(2003,銲接協會),題目:以TEM分析鎳基合金高能量束一種銲件微結構之研究,作者:林永定、李驊登、鄭勝隆、郭聰源
  14. 「九十四年度生物醫學工程科技研討會」壁報論文競賽佳作(中華民國生物醫學工程學會,2005),論文題目:福祉車輪椅收納機構之設計與開發
  15. 列名於Who’s Who in Science and Engineering —(2006~2007)
  16. 列名於第一屆Who’s Who in Asia —(2006~2007)
  17. 南台科技大學工學院「教學優良教師」(2005)
  18. 傑出技專人(教育部,2005)
  19. 高雄高工傑出校友(2005)
  20. 南台科技大學績優工作楷模(2004)

 期刊論文                                                                                                            TOP

  1. C.S. Chien, T.Y. Kuo, T.F. Hong and T.J. Han, “Effects of different adhesive of hydroxyapatite power on microstructure and compounds of cladding layer by Nd-YAG deposition on Ti-6Al-4V substrate” , submitting to Applied Surface Science.(Corresponding author)
  2. C.S. Chien, T.J. Han, T.F. Hong and T.Y. Kuo, “Effects of different adhesive of hydroxyapatite power on weld morphology, Ca/P value and hardness of cladding layer by Nd-YAG deposition on Ti-6Al-4V substrate”, revised, Materials Transactions.(Corresponding author)
  3. H.C. Lin, T.Y. Kuo, C.C. Lin, (2009) , “Pre-Strain and Aging Treatment to Improve the Mechanical Properties of AA6022 Aluminum Alloy Laser Weldment”, Metallurgical and Materials Transactions A. (SCI), accepted
  4. C. F. Lin, C. C. Wu, P. H. Yang, T. T. Kuo, 2009, “Application of Taguchi method in Light-emitting Diode Backlight Design for Wide Color Gamut Displays,” IEEE/OSA, Journal of Display Technology, vol. 5, Issue 8, pp323-330.
  5. 李建興, 郭聰源, 2009, “生醫玻璃與金屬基材批覆應用介紹”, 銲接與切割, 第19卷,第1期,pp. 20-25。
  6. H.C. Lin, T.Y. Kuo, H.T. Lee, 2009, “Pop-In Crack Propagation Monitoring for AA2024-T3 Ductile Alloy”, Materials Transactions, vol.50, no.02, pp.313-320. (SCI)
  7. 鄭壽昌、陳剛毅、林靖翔、郭聰源, 添加In元素對Sn-Zn-Ag-0.05Al無鉛銲錫合金的潤濕性質、熱性質和顯微結構之影響, 銲接與切割, 2008.
  8. 韓宗仁、王威勝、郭聰源、王振欽, 摩擦攪拌銲接在鈦合金之應用, 銲接與切割, 2008.
  9. 郭聰源, 黃東庸, 林聰益,“電療復健步態訓練器”, 機械月刊, 2007.
  10. Hwa-Teng Lee, Yong-Ding Lin, Tsung-Yuan Kuo and Sheng-Long Jeng,“Precipitated Phases and Corrosion Behavior in the Dissimilar Alloy 690-SUS 304L Joints Formed by EBW and GTAW”, Materials Transactions, 2007, SCI
  11. T.Y. Kuo, Yen-Tsun Lin, Effects of the nature of shielding gas and the powerform on penetration characteristics and porosity formation of high viscosity alloy laser welding, Materials Transactions, 2007/02, SCI
  12. 韓宗仁、郭聰源、王威勝, 電漿披覆、脈衝雷射蒸鍍與雷射披覆於生醫植入材之應用, 銲接與切割, 2006/09.
  13. T.Y. Kuo, Y. S. Lin, Effects of shielding gas flow rate and power waveform on Nd-YAG laser welding of 5754-O aluminum alloy, Materials Transactions, 2006/05, SCI
  14. C.-S. Tsao, C.-Y. Chen, U.-S. Jeng, T.Y. Kuo, Precipitation kinetics and transformation of metastable phases in Al-Mg-Si alloys, Acta Materialia, 2006/10, SCI
  15. T.Y. Kuo, H.C. Lin, Effects of pulse level of Nd-YAG laser on tensile properties and formability of laser weldments in automotive aluminum alloys, Materials Science and Engineering A, 2006/1, SCI
  16. C.-S. Tsao, U.-S. Jeng, C.-Y. Chen , T.-Y. Kuo, Small-angle X-ray scattering study of nanostructure evolution of β’’ precipitates in Al–Mg–Si alloy, Scripta Materialia, 2005/09, SCI
  17. T.Y. Kuo, Effect of Pulsed and Continuous Nd-YAG Laser Beam Waves on the Welding of Inconel Alloy, Science and Technology of Welding and Joining, 2005/10, SCI
  18. S.L. Jeng, H.T. Lee, W. P. Rehbach, T.Y. Kuo, T.E. Weirich, J.P. Mayer, Effects of Nb on the Microstructure and Corrosive Property in the Alloy 690 – SUS 304L Weldment, Materials Science and Engineering A, 2005/04, SCI
  19. T.Y. Kuo and S.L. Jeng, Porosity Reduction in Nd-YAG Laser Welding of Stainless Steel and Inconel Alloys by Plused Wave, Journal of Physics D: Applied Physics, 2005/03, SCI
  20. T.Y. Kuo, H. S. Lin and H. T .Lee, Fracture and Thermomechanical Behavior of the Alloys AA2024 of T3 and T81 Temper Designations by Center Crack Tensile Test, Materials Science and Engineering A, 2005/02, SCI
  21. H.T. Lee, S.L. Jeng, C.H. Yen, T.Y. Kuo, Dissimilar Welding of Nickel-Based Alloys 690 to SUS 304L with Ti Addition, Journal of Nuclear Materials, 2004/10, SCI
  22. 郭聰源、劉政益、吳佳霖, 輸出功率形式與保護氣體對鎳基690合金雷射銲接特性之影響研究, 銲接與切割, 2004/06, 其他
  23. T.Y. Kuo, H. S. Lin and H. T .Lee, The Relationship between the Fracture Behaviors and Thermomechanical effects of Alloy AA2024 of T3 and T81 Temper Designations using Center Crack Tensile Test, Materials Science and Engineering A, 2004, SCI
  24. C.S. Tsao, T.Y. Kuo, T.Y. Kuo,T.L. Lin, M.S. Yu, Size Distribution and Coarsening Kinetics of δ‘ Precipitates in Al-Li Alloys Considering Temperature and Concentration Dependence, Materials Science and Engineering A, 2003/12, SCI
  25. H.T. Lee, S.L. Jeng, T.Y. Kuo, The Microstructure and Fracture Behavior of the Dissimilar Alloy 690-SUS 304L Joint with Various Nb Addition, Metallurgical and Materials Transactions A, 2003/05, SCI
  26. T.Y. Kuo, H.T. Lee, C.C. Tu, Evaluation of Effects of Niobium and Manganese Addition on Nickel Base Weldments, Science and Technology of Welding and Joining, 2003/02, SCI
  27. T.Y. Kuo, H.T. Lee, Effects of Filler Metal Composition on Joining Properties of Inconel Alloy Weldments, Materials Science and Engineering A, 2002/12, SCI
  28. H.T. Lee, G.H. Ghaue, T.Y. Kuo, The Study between the Fracture Behavior and the Thermomechanical Effect of Aluminum Alloy 2024-T3 by TPB Cracked Test, Journal of the Chinese Society of Mechanical Engineers, 2000/06, EI
  29. 李驊登、葉東昌、鄭勝隆、郭聰源, I-52與I-82銲件熱處理與耐蝕性之關連研究, 金屬熱處理, 2000/03, 其他
  30. H.T. Lee, T.Y. Kuo, Effects of Nb on the Microstructure, Mechanical Properties and Corrosion Behavior in Weldments of Alloy, Science and Technology of Welding and Joining, 1999/08, SCI
  31. H.T. Lee, T.Y. Kuo, C.J. Tu, D.C. Yeh and S.L. Jeng, Microstructural Aspects and Mechanical Properties of Alloy 690 Weldments Using I-52 and I-152 Weld Metals, Journal of the Chinese Society of Mechanical Engineers, 1999/06, EI
  32. H.T. Lee, T.Y. Kuo, Analysis of Microstructure and Mechanical Properties for Alloy 690 Weldments Using Filler Metals I-82 and I-52, Science and Technology of Welding and Joining, 1999/04, SCI
  33. 郭聰源, 李驊登, 葉東昌, 杜青駿, 鄭勝隆, 1998, ”鎳基690合金銲件之顯微組織與機械性質研究” , 金屬熱處理, 第57期, pp.15-22。
  TOP